Application:

1. Use soft tissue or no flannelette (such as camera lens cloth) clean CPU core surface and heat sink to the bottom, be careful not to let the finger contact core and radiator surface.

2. Determine the radiator with CPU contact area, in the radiator bottom regional center crowded on a certain amount of thermal silicone grease

3. The finger set into the plastic bags, and then press the back and forth with your fingers, daub radiator at the bottom of the thermal silicone grease, until the silicone grease evenly distributed in the CPU contact area. You can through the clockwise and counterclockwise motion, to ensure that silicone grease fill the radiator at the bottom of the aperture and the rough places. Note: do not use directly finger out!

4. Use no flannelette will be at the bottom of the radiator thermal silicone grease erase, then can see radiator bottom coating a silicone grease place and other regional colors that silicone grease has uniform fill the gap base 

5. Use clean tools (such as razor piece or clean knife) make a little thermal silicone grease, and place it into a corner of the CPU core (such as the lower left corner and so on place). Pay attention to, as long as a small piece of it.

6. Use razor piece or other clean tool, from a corner of the CPU core to the silicone grease evenly with the core. For ordinary radiator bottom, silicone grease thickness is about a plain paper thickness, if radiator bottom light level off, then silicone grease can be thin to translucent.

7. Confirm radiator base and CPU core surface no foreign body, the radiator on the CPU, the only light pressure, cannot turn or translation radiator, otherwise it may lead to radiator and CPU between silicone grease thickness uneven.

Note: The paste cannot be shipped by DHL, have to ship by EMS or air mail.